What's New
Hinge Pin Kits
Ball Studs/Ball Cups
Motor Screws
Shock Mounts
Shock Mount Pins/Screws
LoginSearchProduct ListBasket ContentsCheckout

What's New
Trucks > Associated RC10T6.1
Trucks > Associated RC10SC6.1

3.5mm Super Duty Ti Turnbuckle Kit for RC10T6.1/RC10SC6.1

3.5mm Super Duty Ti Turnbuckle Kit for RC10T6.1/RC10SC6.1 Quantity in Basket: None
Code: LNS12022
Price: $45.95
Shipping Weight: 0.06 lbs


The Lunsford Turnbuckle Touch:
- Grade 5 Titanium is roughly a 45% weight savings over steel. 
- Always and only domestic Grade 5 (Ti-6Al-4V) Titanium
- Nano accurate thread rolling process 
     - A very smooth, zero tolerance and bur free threading process aids in the preservation of the parts you are threading into.
- Machined from Made in the USA center-less ground titanium
     - From raw material to the finished product, all of our Grade 5 titanium is born and bred in the USA.
- Manufactured right here in Albany, Oregon USA at the Lunsford compound.
     - Our products are 100% USA sourced, produced, designed and developed.
- All Lunsford Titanium Turnbuckles come with a 100% Guarantee!

What's Included:
2 - 3.5mm x 58mm SUPER DUTY Titanium Turnbuckles (Front Camber)
2 - 3.5mm x 64mm SUPER DUTY Titanium Turnbuckles (Steering)
2 - 3.5mm x 67mm SUPER DUTY Titanium Turnbuckles (Rear Camber)
1 - 1/8" Drill Bit
1 - Super Cool Lunsford Decal

Total Weight of Turnbuckles:
14.4 grams

Note from Kelly:
Rod End Resize Increase the inner diameter your rod ends with the supplied 1/8" drill bit. A small cordless drill works best on a slow speed. Use a paper clip or smilar item to first measure the depth of the threaded area of the rod end. Use that measurement to mark the drill bit to esnure you do not drill beyond the existing depth. 

Ecommerce Shopping Cart Software by Miva